Saubert Air Conditioner Cleaning Foam is developed to help remove dust, dirt, greasy residues and surface contamination that may cause unpleasant odours inside air-conditioning units.

Its dense aerosol foam structure allows controlled application to evaporator surfaces and other accessible areas inside the indoor unit. The foam helps soften accumulated dirt and makes routine cleaning easier.

The high-volume 500 ml aerosol can provides a practical solution for periodic air-conditioner maintenance in homes, offices, retail stores, hotels, restaurants and other commercial environments.

Dense and Controlled Foam Formula

Dust and dirt accumulating inside an air conditioner may affect its cleanliness and contribute to unpleasant odours when the unit is operating.

The surface-clinging foam helps:

• Soften accumulated dust and dirt,
• Loosen greasy surface residues,
• Clean difficult-to-reach evaporator fins,
• Maintain a cleaner indoor unit,
• Reduce unpleasant odours caused by surface contamination.

The product is intended for maintenance and surface cleaning. It does not repair mechanical faults, refrigerant problems or technical performance issues.

Developed for Air-Conditioner Evaporator Surfaces

Subject to the maintenance instructions provided by the appliance manufacturer, Saubert Air Conditioner Cleaning Foam may be used on accessible areas of indoor air-conditioning units.

Suitable applications include:

• Domestic split-system indoor units
• Office air conditioners
• Retail and workplace air-conditioning units
• Evaporator fins
• Air inlet grilles
• Filter frames
• Accessible plastic surfaces inside the unit

Do not apply the product to electronic circuit boards, wiring, sensors, motors or electrical components.

Helps Remove Dirt and Odour-Causing Residues

Moisture, dust and airborne contamination may accumulate inside air-conditioning units over time. These residues may contribute to unpleasant odours when the appliance is switched on.

Saubert Air Conditioner Cleaning Foam helps remove surface contamination and supports cleaner, fresher maintenance of the indoor unit.

Do not describe the product as antibacterial, disinfectant or germ-killing unless the required performance tests and regulatory authorisations are available.

High-Volume 500 ml Aerosol Can

The 500 ml aerosol package helps distribute the foam evenly and provides controlled application.

Benefits of the aerosol format include:

• Quick and convenient application
• Easier access to difficult areas
• Even foam distribution
• Practical use on larger surfaces
• Suitable volume for home and professional use

Key Features

• Foam formula developed for indoor air-conditioner cleaning
• High-volume 500 ml aerosol can
• Controlled application to evaporator surfaces
• Helps remove dust, dirt and greasy residues
• Helps reduce unpleasant odours caused by surface contamination
• Dense foam that clings to the surface
• Easy application to difficult-to-reach areas
• Suitable for homes, offices and workplaces
• Practical support for periodic air-conditioner maintenance

Directions for Use

1. Switch off the air conditioner and disconnect it from the power supply.
2. Make sure the indoor unit has completely stopped.
3. Open the front cover according to the appliance manufacturer’s instructions.
4. Remove the filters and clean them separately.
5. Protect circuit boards, sensors, motors and wiring from contact with the product.
6. Shake the aerosol can thoroughly before use.
7. Spray evenly onto the evaporator surface from a distance of approximately 15–20 cm.
8. Allow the foam to soften the dirt for the period stated on the product label.
9. Depending on the formulation and label instructions, rinse using the appropriate method or wipe the surface with a clean cloth if required.
10. Refit the filters only after they are completely dry.
11. Reconnect the power supply only after the indoor unit is completely dry.

Seek assistance from a qualified air-conditioning technician if the internal components are not safely accessible or the unit is heavily contaminated.

Safety Information

• Disconnect the appliance from the power supply before application.
• Do not apply to a running or hot appliance.
• Do not spray onto circuit boards, motors, sensors or electrical connections.
• Do not inhale the spray or direct it towards the face.
• Avoid contact with eyes and skin.
• Use in a well-ventilated area.
• Pressurised aerosol container: do not pierce or burn.
• Keep away from flames, sparks and hot surfaces.
• Protect from direct sunlight.
• Do not store at high temperatures.
• Keep out of the reach of children.
• Do not use on food-contact surfaces.
• Check the appliance manufacturer’s instructions before use in vehicle air-conditioning systems or other specialist equipment.
• Test on a small, inconspicuous area before use on sensitive or painted surfaces.
• Always follow the instructions and warnings shown on the product label.

Technical Information

SpecificationValueProduct typeAir conditioner cleaning foamProduct formatAerosol foamNet volume500 mlIntended surfacesIndoor air-conditioning units and compatible accessible surfacesApplication methodControlled surface sprayingCleaning purposeHelps remove dust, dirt, grease and odour-causing residuesPackagingPressurised aerosol canUse environmentHome, office and professional environments