Saubert Water Dispenser and Water System Cleaner is developed to help remove limescale, dirt, sediment and odour-causing residues that may accumulate inside water dispensers, bottled-water pumps, ice machines and other compatible water systems.

Residues may form inside water tanks, connecting channels and other difficult-to-reach areas, even when the appliance appears clean from the outside. Saubert Water System Cleaner supports periodic maintenance by helping loosen and remove these deposits.

Always use the product according to the appliance manufacturer’s maintenance instructions and the dilution information stated on the product label.

Periodic Maintenance of Water Systems

Internal parts of water-handling equipment may accumulate sediment, limescale and surface residues over time.

Regular cleaning helps:

• Remove residues from water tanks,
• Clean internal water channels,
• Reduce limescale and sediment build-up,
• Remove possible sources of unpleasant odours,
• Maintain a cleaner water system.

The product does not repair technical faults or replace filters and worn components. Filters and other service parts must be replaced separately according to the appliance manufacturer’s instructions.

Helps Remove Sources of Unpleasant Odours

Standing water, moisture and deposits inside water systems may contribute to unpleasant odours.

Saubert Water System Cleaner helps remove surface residues that may cause these odours, supporting cleaner and fresher maintenance of the appliance.

The product focuses on removing possible sources of odour rather than simply masking them with fragrance.

Suitable Applications

Subject to the appliance manufacturer’s care and cleaning instructions, the product may be used with:

• Hot and cold water dispensers
• Top-loading bottled-water dispensers
• Bottom-loading bottled-water dispensers
• Manual bottled-water pumps
• Electric water pumps
• Water storage tanks
• Compatible water circuits in ice machines
• Water distribution systems
• Compatible drinking-water equipment

For filtered systems, confirm whether the cleaning solution may pass through the filter. Where required, remove or replace the filter according to the appliance manufacturer’s instructions.

Key Features

• Developed for the internal cleaning of water dispensers and water systems
• Helps remove limescale, sediment and surface residues
• Supports the removal of odour-causing contamination
• Maintenance cleaning of difficult-to-reach internal channels
• Suitable for compatible water dispensers and bottled-water pumps
• Suitable for compatible water circuits in ice machines
• Makes periodic maintenance easier
• Suitable for home, office and professional environments

Directions for Use

1. Switch off the appliance and disconnect it from the power supply.
2. Drain all water from the system.
3. Remove the water bottle, filters and detachable parts according to the appliance manufacturer’s instructions.
4. Prepare the cleaning solution using the dilution and quantity stated on the product label.
5. Apply the prepared solution to the water tank.
6. Where permitted by the appliance manufacturer, allow the solution to pass through the internal channels and taps.
7. Leave the solution in the system for the period stated on the product label.
8. Drain the cleaning solution completely.
9. Rinse the water tank and internal channels several times with clean drinking water.
10. Make sure no foam, odour or product residue remains in the system.
11. Clean and rinse detachable parts thoroughly before refitting them.
12. Fill the appliance with clean water and discard the first complete filling.
13. Use the appliance again only after the system has been fully rinsed.

The precise dosage, contact time and required rinsing volume must be stated on the product label. These values should not be invented without confirmed formulation data.

Safety Information

• Disconnect the appliance from the power supply before cleaning.
• Do not add the product to drinking water for consumption.
• Drain all drinking water before beginning the cleaning process.
• Do not mix with other cleaning chemicals.
• Do not combine with bleach, chlorine-based products or other acidic cleaners.
• Rinse the entire system thoroughly with clean water after use.
• Do not consume water containing product residue.
• Avoid contact with eyes and skin.
• Do not inhale or swallow the product.
• Wash hands after use.
• Keep out of the reach of children.
• Store separately from food and beverages.
• Follow the appliance manufacturer’s maintenance instructions.
• Follow all warnings on the product label and safety data sheet.

Technical Information

SpecificationDescriptionProduct typeWater dispenser and water system cleanerSuitable equipmentWater dispensers, bottled-water pumps, water tanks and compatible water systemsIntended useHelps remove limescale, sediment, dirt and odour-causing residuesApplicationPeriodic maintenance of an emptied systemRinsingThorough rinsing with clean water is required after useUse environmentHome, office and professional environments